【ANSI】DN250 single sphere ANSI standard rubber expansion joint “150LB”
The official website of Shanghai Songjiang Vibration Absorber Co.,Ltd. provides you with information on the 【ANSI】DN250 single sphere ANSI standard rubber expansion joint “150LB”. Songjiang Group manufactures various rubber expansion joints that adhere to ANSI standards, primarily using the 150LB flange standard. The rubber length is 130mm, with a pressure rating of PN20, and the rubber is made from EPDM material.
1. Actual Photos of the ANSI Standard Rubber Expansion Joint:
2.Introduction to the ANSI Standard Rubber Expansion Joint:
Name: ANSI Standard Rubber Expansion Joint
Model: ANSI-150LB
Diameter: DN250 (10 inches)
Rubber: EPDM (All EPDM rubber used by Songjiang Group is made from Japan’s Mitsui 4045, with a content of about 50%. It comes with material certification, content test reports, and certificates from the National Type Test Center, including product inspection and performance test reports.)
Flange: Carbon steel, cold galvanized
Advantages: Vibration reduction, noise reduction, pipeline compensation, flexible deflection, and displacement capability.
Warranty: 3 years
Installation Length: 130mm (150mm)
Axial Compression: 17mm
Axial Extension: 9mm
Lateral Displacement: 12mm
Deflection Angle: 5°
Standard: ANSI-150LB
Flange Outer Diameter: 405mm
Bolt Hole Center Distance: 362mm
Bolt Hole Diameter: 26mm
Number of Bolt Holes: 12
Pressure: 150LB (PN20)
Flange Material: Carbon steel (Q235)
Medium: Seawater
Manufacturer: Shanghai Songjiang Vibration Absorber Co.,Ltd.
3. Shipping Site for ANSI Standard Rubber Expansion Joints:
4.Shanghai Songjiang Vibration Absorber Co.,Ltd. Introduction:
