120*120*20 Rubber Vibration Isolation Pad for Air Compressors
Shanghai Songjiang Vibration Absorber Co.,Ltd. official website introduces: 120*120*20 Rubber Vibration Isolation Pad information. Songjiang Group recommends rubber vibration isolation pads for air compressors. This product is easy to install, cost-effective, and suitable for industrial air compressors with low vibration reduction requirements.
The characteristics of rubber vibration isolation pads for air compressors include both high elasticity and high viscosity. The elasticity of rubber arises from the changes in the coiled molecular configuration. The interactions between rubber molecules hinder the movement of molecular chains, exhibiting the characteristics of viscous damping. This often results in stress and strain being in an unbalanced state.
The rubber vibration isolation pads for air compressors produced by Songjiang Group are made from high-quality natural rubber (NR), providing excellent elasticity and making a significant contribution to vibration reduction in industrial plants.
The rubber vibration isolation pad for air compressors is made of high-quality rubber material with circular depressions and shear corrugated shapes. It is primarily subjected to shear force and has the characteristics of low natural frequency, simple structure, and easy use. To enhance the vibration reduction effect, the vibration isolation pad can be suitable for stacking in two, three, or four layers. It is suitable for eliminating vibration in mechanical equipment such as water pumps, fans, compressors, chilled water units, and diesel generators.
The important features and applications of the rubber vibration isolation pad for air compressors are as follows:
The rubber vibration isolation pad for air compressors is made of oil-resistant rubber as the elastic material, molded through vulcanization. Its corrugated surface reduces the vertical stiffness of the isolation pad. The basic block size of the isolation pad is 84x84x20(mm). This series of products consists of one standard size and three rubber hardness options. The load-bearing range is from 0.2KN to 6KN.To enhance the vibration isolation effect, multiple layers of isolation pads can be connected in series. Metal sheets (3mm) are used to separate each layer. The total stiffness of n layers in series is 1/n times that of a single layer. Considering vertical stability, the total height of the series-connected isolation pads should not exceed the width of a single isolation pad.When the isolated object is relatively light, the isolation pads can be divided into 1/2 pieces. The load-bearing capacity and stiffness of the divided isolation pads are also half of the original, and the divided pads can be connected in series again.
Note: This product is not in stock, and ordering requires one week of lead time.
