Stainless Steel Metal Hose from Shanghai Songjiang for Hefei Thermal Energy Center Project

Stainless Steel Metal Hose from Shanghai Songjiang for Hefei Thermal Energy Center Project

Shanghai Songjiang  successfully won the bid for the Hefei Thermal Energy Center Project in 2015. The project is equipped with Songjiang Group’s stainless steel metal hose products, including DN700 stainless steel metal hose, DN400 stainless steel metal hose, and other products.

1. On-site of Hefei Thermal Energy Center Project:

2. Introduction to Hefei Thermal Energy Center Project:

Anhui Jinyuan Thermal Power Co., Ltd. is a modern cogeneration enterprise established in accordance with the modern corporate system. The company is located at the intersection of Qingluan Road and Fangxing Avenue in Hefei Economic and Technological Development Zone, a national development zone. It was jointly established in June 2004 with a registered capital of 200 million yuan by Hefei Haiheng Investment Holding Group Company, Anhui Kangyuan Power Group Co., Ltd., Anhui Wanzhong Electric Power Industrial Co., Ltd., and Hefei Electric Power Installation Corporation. The company is mainly engaged in the production and sales of electricity and heat, as well as the production and sales of related materials and equipment.

Anhui Jinyuan Thermal Power Co., Ltd.’s cogeneration project was approved by the National Development and Reform Commission in July 2006 and started construction on September 20, 2006. This project is a key infrastructure construction project of the “1346” action plan in Hefei, and it is also the largest cogeneration project with the highest investment scale in Anhui Province. The construction scale of this phase of the project includes 75 MW (50 MW + 25 MW) heating and power generation units, 3 sets of 220T/H high-temperature and high-pressure boilers, a 30km heating pipe network, and the supporting construction of efficient dust collectors and flue gas desulfurization devices.

3. Details of the Hefei Thermal Energy Center Project:

After the completion of this phase of the project, the annual electricity generation can reach 410 million kWh, and the heating capacity can reach 7.6 million GJ. It can achieve an annual output value of 400 million yuan, replace 91 small boilers with high energy consumption and pollution in the development zone, save 200,000 tons of coal, reduce smoke and dust emissions by 175 tons, and reduce sulfur dioxide emissions by 1,713 tons. The completion and operation of the cogeneration project are conducive to attracting investment in the development zone, Binhu New Area, and Feixi County, as well as the improvement of the level and scale of infrastructure. It is also an important part of Hefei’s “Three Promotions,” the construction of an “Ecological Hefei,” and the development of a “Conservation-Oriented Society.”

The total investment in the project is about 1 billion yuan, with a land area of around 260 acres. The project was designed by Anhui Provincial Electric Power Design Institute, constructed by the First Engineering Company of Anhui Electric Power Construction, and fully supervised by Anhui Provincial Electric Power Engineering Supervision Limited Liability Company. Currently, the project is in the construction phase, and the project company is making every effort to speed up the construction progress, scientifically arrange the work, and ensure the timely completion of the project in accordance with the instructions of the municipal party committee and government.

4. Inauguration Ceremony of Anhui Jinyuan Thermal Energy Engineering Co., Ltd.:

Anhui Jinyuan Thermal Energy Engineering Co., Ltd., formerly known as Anhui Chiyehuo Thermal Energy Engineering Co., Ltd., is a subsidiary of Jinyuan Corporation. In 2012, Jinyuan Thermal Power merged into the Thermal Power Group. To further expand the thermal power construction market and enhance corporate competitiveness, the group decided to increase the capital of the original Chiyehuo Thermal Energy Company and rename it Anhui Jinyuan Thermal Energy Engineering Co., Ltd., while incorporating it into the group’s assessment scope. Since its establishment in 2008, after years of hard work and entrepreneurship, the company has developed into a well-known enterprise in the thermal installation industry in Hefei, relying on strong professional technology and flexible business methods. With high-quality products and excellent after-sales service, it has won the favor of consumers.

On the morning of March 28, the inauguration ceremony of Anhui Jinyuan Thermal Energy Engineering Co., Ltd. was held in the office building of Jinyuan Corporation. Group leaders, relevant department heads, shareholder representatives of Jinyuan Thermal Power Company, and representatives of Anhui Qingtianhe and Tuo Environmental Engineering Co., Ltd. attended the ceremony. During the inauguration ceremony, Chen Jie, Vice Chairman of Hefei Thermal Power Group, Deputy Secretary of the Party Committee, and Executive Vice General Manager, as well as Cheng Mu, Chairman of Anhui Qingtianhe and Tuo Environmental Engineering Co., Ltd., delivered speeches expressing best wishes for the company and high expectations for future development. Finally, they jointly unveiled the plaque for ‘Anhui Jinyuan Thermal Energy Engineering Co., Ltd.

5. Introduction to Hefei Thermal Energy Center Company:

Anhui Jinyuan Thermal Power Co., Ltd. mainly engages in the construction of power and thermal projects. The company upholds the enterprise spirit of ‘down-to-earth, hardworking, and responsible,’ and follows the business philosophy of integrity, mutual benefit, and pioneering. It creates a favorable corporate environment, considers the new management model, perfects technology, provides thoughtful services, and strives for excellent quality as the fundamental survival. The company always insists on customer-oriented service, dedicating itself to impressing customers with its services.

Anhui Jinyuan Thermal Power Co., Ltd. is a modern enterprise established in accordance with modern corporate systems. Located at the intersection of Qingluan Road and Fangxing Avenue in the Hefei Economic and Technological Development Zone, it was jointly established by Hefei Haiheng Investment Holding Group Co., Ltd., Anhui Kangyuan Power Group Co., Ltd., Anhui Wanzhong Electric Power Industrial Co., Ltd., and Hefei Power Installation General Company, with a registered capital of 200 million yuan, in June 2004. The company’s main business includes the production and sales of electricity, thermal energy, and related material equipment production and sales.

The scale of this phase of the project includes 75 MW (50 MW+25 MW) heating and power generation units, 3 sets of 220T/H high-temperature and high-pressure boilers, a 30km heating pipe network, and the supporting construction of efficient dust removal and flue gas desulfurization devices. The total investment of the project is approximately 1 billion yuan, covering an area of about 260 acres. The project is designed by the Anhui Power Design Institute, constructed by the Anhui Electric Power Construction First Engineering Company, and supervised by the Anhui Power Engineering Supervision Co., Ltd. The project is currently in the construction phase, and the project company is making every effort to speed up construction in accordance with the instructions of the Municipal Party Committee and Municipal Government, ensuring scientific arrangements and ensuring the project is put into operation on schedule. After the completion of this phase of the project, the annual power generation can reach 410 million kWh, and the heating capacity can reach 7.6 million GJ. It can achieve an annual output value of 400 million yuan, replace 91 existing high-energy consumption and high-pollution small boilers in the development zone, save 200,000 tons of coal, reduce smoke and dust emissions by 175 tons, and reduce sulfur dioxide emissions by 1,713 tons. The completion and operation of the thermal power project are beneficial to attracting investment in the development zone, Binhu New Area, and Feixi County, as well as improving the level of infrastructure and the promotion of Hefei City’s ‘Three Major Advancements’ and the construction of an ‘Ecological Hefei’ and ‘Economical Society.’

Anhui Jinyuan Thermal Power Co., Ltd.’s combined heat and power project was approved by the National Development and Reform Commission in July 2006 and started construction on September 20, 2006. The project is a key infrastructure construction project in Hefei City’s ‘1346’ Action Plan and the largest investment and construction project in Anhui Province.

6.【Hefei Thermal Energy Center Project】Introduction of Shanghai Songjiang Stainless Steel Metal Hose:

Introduction:

Corrugated metal hose, also known as flexible hose, is one of the series of metal hose products. It is a high-quality flexible pipeline widely used in modern industrial piping.
It possesses excellent flexibility, fatigue resistance, high pressure resistance, good temperature resistance, corrosion resistance, and strong sealing properties. Its lifespan is significantly longer compared to other hoses such as rubber and plastic hoses.
It finds extensive applications in industries such as aviation, aerospace, petroleum, chemical, steel, power, papermaking, construction, rubber, textile printing and dyeing, pharmaceuticals, food, and transportation. With the development of modern industry, there is an increasing demand for high-quality, high-performance corrugated metal hoses.

Definition:

Corrugated metal hose is defined as a metal hose with external armor of metal wire or a mesh of metal strips, having a length-to-diameter ratio greater than or equal to 3, and forming a circular or helical corrugated tube.
In European and American countries, it is commonly referred to as a flexible tube, corrugated hose, or flexible hose, with the specific term being corrugated metal hose.

Applications of Corrugated Metal Hose:

In China’s metal hose industry, the main applications of domestic metal hose products are as follows: The product structure is simple, the equipment is rudimentary, and the quality is unstable.
In the military hose industry, the market is divided into aerospace hoses and ground equipment hoses. Aerospace hoses are still primarily seamless hoses due to the constraints of standardized products. There is a gradual trend towards the civilian use of stainless steel metal hoses for ground equipment, as the risks in these applications are smaller. The structural adjustments for both types of hoses are not significant.

Civil Hose Main Industries:

In the steel and metallurgy industry, stainless steel metal hoses are gradually transitioning from performance competition to competition based on the performance-to-price ratio. The product structure is basically standardized, and the use of stainless steel metal hoses in this industry is widely accepted.
In the petrochemical industry, the situation is relatively complex. On one hand, there is a growing demand for large-diameter, high-pressure hoses, and central drainage hoses for storage tanks. On the other hand, there is a phenomenon of other products replacing hoses in some scenarios, such as the appearance of non-metallic pipes (lightweight, pressure-resistant) in the market for dock pipelines. Since the petrochemical industry is a significant market for domestic hoses, competition is fierce, and the development costs for new products in this field are also substantial.
Specialized hose industry mainly refers to the marine hose series. Due to the high equipment requirements and huge investment scale (about 500 million RMB), China currently lacks the ability to independently develop and manufacture these hoses. Most of them rely on imports, even though the market potential is enormous.

The information regarding the adoption of Shanghai Songjiang stainless steel metal hoses in the Hefei Thermal Energy Center Project is sourced from the official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. For further details, you can visit: http://www.songjiangjituan.com.

Related Product:JTW-DN100 National Standard Metal Hose